Chapter 20 - Specifications
Processor and memory
|
|
| Processor |
SparkFun Teensy MicroMod (ARM Cortex-M7, 600 MHz) |
| Patch storage |
128 KB EEPROM (two 64 KB chips) |
| Patches |
64 - 8 banks (A–H) of 8 |
Display and controls
|
|
| Display |
160 × 128 colour TFT (ST7735) |
| PARAMETER Knobs |
8 endless rotary encoders with push |
| CONTROL Knob |
1 endless rotary encoder with push |
| CONTROL buttons |
6, each with a full-colour LED |
| Audio |
Onboard buzzer - metronome click and startup tune |
MIDI
|
|
| MIDI In |
3.5 mm TRS Type-A |
| MIDI Out A / Out B |
3.5 mm TRS Type-A, independently routable |
| USB-C |
Class-compliant USB MIDI, and power |
| USB Host |
Type-A, for class-compliant USB MIDI controllers |
| Clock |
MIDI clock in and out at 24 PPQN; transport in and out |
All three inputs are live at once and merged into a single stream (Chapter 15).
Sequencer
|
|
| Tracks |
3 - Chord, Melody, Bass |
| Internal resolution |
384 ticks per bar |
| Time signatures |
4/4, ¾, 2/4, 6/8 |
| Chord chain |
Up to 32 links; 8 user chains per bank |
| Patch chain |
Up to 32 links; 8 user slots, shared across banks |
| Melody Stepper |
8 lanes, up to 32 steps each |
| Modulators |
8 per patch, plus 16 global |
Firmware
Updated over USB-C using the rear-panel Firmware Update button and Teensy Loader (Chapter 18). Updates preserve your patches.
Physical and power
Dimensions, weight and power requirements to be confirmed.